A digital multimeter is a device that measures two or more electrical quantities, primarily voltage (volts), current (amps), and resistance (ohms) (ohms). For technicians in the electrical and electronic industries, it is a typical diagnostic tool.
The Fluke 87V Industrial Multimeter provides the resolution and accuracy to efficiently troubleshoot motor drives, plant automation, power distribution, and electromechanical equipment even in loud, high-energy, and high-altitude locations. A low pass filter supports accurate frequency measurements on VFDs and captures intermittents as fast 250 µS.
Use the 87V to measure AC current up to 10 A directly, or use an optional clamp for high current measurements, frequency to 200 kHz, plus % duty cycle, resistance, continuity and diode test. And it includes a built-in thermometer so you can take temperature readings without having to carry a separate instrument, and more. Plus, with its bright, two-level backlit display you’ll be able to see the results better in dim light.
Correctly measure pulse-width modulated motor drive signals
The Fluke 87V takes the guesswork out of drive system troubleshooting. It includes a unique function for accurately measuring noisy at the VFD and at the motor terminals. Special shielding blocks high-frequency, high-energy noise generated by large drive systems.
Electrical safety
All the inputs in the 87V are updated to the third and CAT III, 1000 V. They are designed to withstand spikes in excess of 8000 V.
Key features:
Rugged, high accuracy industrial multimeter to measure current, voltage and frequency on complex variable frequency drive (VFD) signals
Offers true-RMS AC voltage and current for measuring non-linear signals
Captures intermittents as short as 250 µS
Safety rated CAT III 1000 V, CAT IV 600 V
Includes a built-in thermometer and temperature probe
Other useful features:
Easy access door for fast battery changes without breaking the calibration seal
Removable holster with built in test lead and probe storage for convenience
Audible Input Alert warning against wrong use of input jacks
Provides peak capture and Min/Max/Avg recording to capture intermittents as short as 250 µS
Designed and built in the U.S.
Comes with a lifetime warranty
Features—6000 counts, 3-3/4 digit resolution, or 20,000 counts, 4-1/2 digit—resolution
Fits into an optional magnetic hanger for easy set-up and viewing while freeing your hands for other tasks
Includes an analog bargraph for fast changing or unstable signals
Presents a large digit display with bright, two-level backlight for easier reading in low light
Delivers 0.05?accuracy
Measures up to 1000 VAC and DC
Provides 10,000 µF capacitance range for components and motor caps
Offers relative mode to remove test lead interference from low ohms measurements
Features auto and manual ranging for maximum flexibility
Includes Touch Hold to capture stable readings of noisy signals
What's Included?
TL75 Test Leads
AC175 Alligator Clips
Holster
9V Battery (Installed)
80BK Temperature Probe
Specifications
Voltage DC
Maximum voltage
1000 V
Accuracy
±(0.05% + 1)
Maximum resolution
10 µV
Voltage AC
Maximum voltage
1000 V
Accuracy
±(0.7% + 2) True RMS
AC bandwidth
20 kHz with low pass filter; 3 db @ 1 kHz
Maximum resolution
0.1 mV
Current DC
Maximum amps
10 A (20 A for 30 seconds maximum)
Amps accuracy
±(0.2% + 2)
Maximum resolution
0.01 µA
Current AC
Maximum amps
10 A (20 A for 30 seconds maximum)
Amps accuracy
±(1.0% + 2) True RMS
Maximum resolution
0.1 µA
Resistance
Maximum resistance
50 MΩ
Accuracy
±(0.2% + 1)
Maximum resolution
0.1 Ω
Capacitance
Maximum capacitance
9,999 µF
accuracy
±(1% + 2)
Maximum resolution
0.01 nF
Frequency
Maximum frequency
200 kHz
Accuracy
±(0.005% + 1)
Maximum resolution
0.01 Hz
Duty cycle
Maximum duty cycle
99.9%
Accuracy
±(0.2% per khz + 0.1%)
Maximum resolution
0.1%
Temperature measurement
–200.0 °C – 1090 °C
–328.0 °F – 1994.0 °F
excluding probe
80 BK temperature probe
–40.0 °C – 260 °C
–40.0 °F – 500 °F, 2.2 °C or 2% whichever is greater
Conductance
Maximum conductance
60.00 nS
Accuracy
±(1.0% + 10)
Maximum resolution
0.01 nS
Diode
Range
3 V
Resolution
1 mV
Accuracy
±(2% + 1)
Duty cycle range
Accuracy
Within ±(0.2% per kHz + 0.1%)
Environmental Specifications
Operating temperature
–20 °C to + 55 °C
Storage temperature
–40 °C to + 60 °C
Humidity (without condensation)
0% – 90% (0 °C – 35 °C)
0% – 70% (35 °C – 55 °C)
Operating Altitude
2000 m
Safety Specifications
Overvoltage category
EN 61010–1 to 1000 V CAT III, 600V CAT IV
Agency approvals
UL, CSA, TÜV, VDE listed
Mechanical and General Specifications
Size
201 x 98 x 52 mm (with holster)
Weight
355 g
624 g – with holster
Display
Digital
6000 counts updates 4/sec.
19,999 counts in high–resolution mode
Versatile meters for field service or bench repair.
The Fluke 77 IV digital multimeter has the features needed to repair most electrical and electronic problems. This meter is simple to use and has significant improvements over Fluke’s original 70 Series with more measurement functions, conformance to the latest safety standards, and a much larger display that’s easier to view.
FEATURES
Large display
Backlight for work in dim areas
Min / Max to record signal fluctuations
Ergonomic overmolded housing with integrated probe holders
Free your hands with the optional TPAK magnetic hanger
Auto and Manual ranging
Meets Measurement Category 1000 V CAT III and Category IV 600 V safety standards
It measures:
Wide 1000 V measurement range
Average responding AC measurements
0.3 Acccuracy
10 Amps continuous (20 A for 30 seconds)
Frequency and capacitance
Resistance and continuity
What's Included?
Installed 9V battery
Test leads
Users manual
Specifications
Specifications
Voltage DC
Range
6.000 V – 1000 V
Best accuracy
±(0.3% + 1)
Best resolution
0.1 mV
Voltage AC
Range
600.0 mV – 1000V
Best accuracy
±(2.0% + 2)
Best resolution
1.0 mV
Amps AC
Range
60.00 mA – 10 A
Best accuracy
2.5% + 2
Best resolution
0.01 mA
Amps DC
Range
60.00 mA – 10A
Best accuracy
1.5% + 2
Best resolution
0.01 mA
Resistance
Range
600.0 Ω – 50 MΩ
Best accuracy
±(0.5% + 1)
Best resolution
0.1 Ω
Capacitance
Range
1nF – 9,999 μF
Best accuracy
±(1.2% + 2)
Best resolution
1 nF
Frequency
Range
99.99Hz – 99.99kHz
Best accuracy
±(0.1% + 1)
Best resolution
0.01 Hz
Safety
ANSI / ISA S82.02.01, CSA C22.2–1010.1, IEC 61010 to 1000 V Measurement Category III, 600 V Measurement Category IV
Certifications
CSA, TÜV (EN61010), Π, (N10140)
General Specifications
Maximum voltage between any terminal and earth ground
1000 V
Surge protection
8 kV peak per IEC 61010
Ω Fuse for mA inputs
440 mA, 1000 V FAST Fuse
Ω Fuse for A inputs
11 A, 1000 V FAST Fuse
Display
Digital
6000 counts, updates 4/sec
Bar graph
33 segments, updates 32/sec
Frequency
10,000 counts
Capacitance
1,000 counts
Altitude
Operating
2,000 meters
Storage
12,000 meters
Temperature
Operating
-10°C to + 50°C
Storage
-40°C to + 60°C
Temperature coefficient
0.1 x (specified accuracy / °C (< 18> 28°C)
Electromagnetic compatibility
(EN 61326–1:1997)
In an RF field of 3 V/M, accuracy = specified accuracy except in temperature:
specified accuracy ±5°C (9°F)
The Fluke 28 II digital multimeter defines the standard for operating in harsh conditions with the features and accuracy to troubleshoot most electrical problems. The meter offers an IP 67 (waterproof and dustproof) rating, MSHA approvals, extended operating temperature range of -15 °C to +55 °C (5 °F to 131 °F, -40 °C for up to 20 minutes) and 95% humidity, and has been designed and tested to withstand a 3 m (10 ft) drop. The Fluke 28 II Rigged Digital Multimeter is built to work in the toughest environments.
Other key capabilities
Measure up to 1000 V AC and DC
Measure up to 10 A (20 A for 30 seconds)
10,000 μF capacitance range
Frequency to 200 kHz
Extended AC voltage bandwidth– 15 Hz to 20 kHz
Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
Resistance, continuity and diode test
Min/Max and average recording to capture variations automatically
Peak min-max
Hi resolution 20,000 count display mode
True-rms ac voltage and current for accurate measurements on non linear signals
Backlit keypad buttons allow for easy visibility in low-lit areas
Large display digits and 2 level bright white backlight for increased visibility
Reversible holster for added protection when not in use
Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards
Long battery life (800 hours)
Relative mode to remove test lead resistance from low ohms measurements
Auto and manual ranging for maximum flexibility
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks
Key features
IP 67 waterproof & dustproof protection, completely sealed for use in harsh environments
Designed to withstand 3 meter drop (with holster)
Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
This True RMS Logging Multimeter helps you find little problems before they become big ones
For use for solving complex problems in electronics, plant automation, power distribution, and electro-mechanical equipment, this multimeter also features TrendCapture. This gives the user the ability to log data and graphically review up 10,000 recorded events and logged readings. Additionally, zoom on trend provides a 14 times zoom to view and analyze data without needing a PC.
Since this instrument is Fluke Connect-compatible, users can set it up with the ir3000 FC wireless connector (sold separately) to communicate with your iOS and Android smart devices through the Fluke Connect mobile app and monitor readings from a remote location. Additionally, users can share readings with their team in an instant anytime, from anywhere with ShareLive™ video call. It can help you solve problems faster and minimize downtime.
Features
Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and Fluke Connect mobile app)
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy
Low pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment
LoZ volts, low impedance voltage function for eliminating ghost voltages
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event
Large 50,000 count, ¼ VGA dot matrix display with white backlight
Logging function with expanded memory for unattended monitoring of signals over time
Using on-board TrendCapture users can graphically review logged readings without needing a PC
Store up to 15,000 recorded events
Save multiple logging sessions before PC download is necessary
Two terminal 50 Ω range with 1 MΩ resolution, 10 mA source current
On board help screens for measurement functions
Real time clock for automatic time stamping of saved readings
Relative mode to remove test lead resistance from low ohms or capacitance measurements
True RMS AC voltage and current for accurate measurements on non-linear signals
Measure up to 10 A (20 A for 30 seconds)
100 mF capacitance range
Peak capture to record transients as fast as 250 µs
Works with optional FlukeView forms to enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents
Share results with your team using ShareLive™ video call (requires ir3000 FC wireless connector [sold separately] and no-cost Fluke Connect mobile app).
TrendCapture graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Low Pass filter for accurate voltage and frequency measurements at the same time on adjustable speed motor drives and other electrically noisy equipment.
LoZ Volts. Low impedance voltage function for eliminating ghost voltages. Also recommended when testing for absence or presence of live power.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA dot matrix display with white backlight.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
Save multiple logging sessions before PC download is necessary.
Two terminal 50 ohm range with 1 milliohm resolution, 10 mA source current. Useful for measuring and comparing differences in motor winding resistance or contact resistance.
On board help screens for measurement functions. Unsure about a function – go to that function and press the “i” button.
Real time clock for automatic time stamping of saved readings.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
True-RMS AC voltage and current for accurate measurements on non-linear signals.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks.
FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Limited lifetime warranty.
Fluke 289 True-RMS Logging Multimeter helps you find little problems before they become big ones
The Fluke 289 is the next generation high performance industrial logging multimeter. This Fluke Connect-compatible DMM is designed to solve complex problems in electronics, plant automation, power distribution, and electro-mechanical equipment. Let the 289 be your watchdog for systems or processes while you are off doing other jobs. It provides the ability to log data and graphically review up 10,000 recorded events and logged readings with on-board TrendCapture. Zoom on trend provides a 14x zoom to view and analyze data—without needing a PC.
Because the 289 is Fluke Connect-compatible you can set it up with the ir3000 FC wireless connector (sold separately) to communicate with your iOS and Android smart devices through the Fluke Connect mobile app and monitor readings from a remote location. Or you can share readings with your team in an instant anytime, from anywhere with ShareLive™ video call. It can help you solve problems faster and minimize downtime.
NEW – Now compatible with Fluke Connect mobile app and all Fluke FC enabled test tools with optional ir3000 FC infrared connector (sold separately).
NEW – Let your team see what you see in an instant with ShareLive™ video call (requires Fluke Connect mobile app and ir3000 FC wireless connector).
TrendCapture quickly graphically displays logged data session to quickly determine whether anomalies may have occurred.
Zoom on trend provides unprecedented ability to view and analyze TrendCapture data; zoom in up to 14 times.
Selectable AC filter (smoothing mode) helps display a steadier reading when the input signal is changing rapidly or noisy.
Adjustable recording and auto hold thresholds, specify a percentage change in the readings that begins a new event.
Large 50,000 count, 1/4 VGA display with white backlight. Multiple sets of measurement information can be simultaneously displayed at the same time.
Logging function with expanded memory for unattended monitoring of signals over time. Using on-board TrendCapture users can graphically review logged readings without needing a PC. Store up to 15,000 recorded events.
On board help screens for measurement functions.
Saved measurements allow you to name and recall measurements made in the field.
Multi-lingual interface.
Multiple logging sessions possible without download.
0.025?sic DC accuracy.
100 kHz AC bandwidth.
Real time clock for automatic time stamping of saved readings.
True-RMS AC voltage and current for accurate measurements on complex signals or non-linear loads. AC bandwidth specified to 100 kHz.
Measure up to 10 A (20 A for 30 seconds).
100 mF capacitance range.
Temperature function.
Relative mode to remove test lead resistance from low ohms or capacitance measurements.
Peak capture to record transients as fast as 250 μs.
Premium test leads and alligator clips included.
Amp jack plugs included.
Optional FlukeView forms enable you to document, store and analyze individual readings or a series of measurements, then convert them into professional-looking documents.
Optional magnetic hanger allows you to hang the meter for easy viewing while freeing your hands to focus on the job.
Fluke 233 Remote Display Digital Multimeter gives you ultimate flexibility in tough measurement situations
The Best Digital Multimeter, Fluke 233 with its removable display gives you the flexibility to take measurements in hard to reach places or in areas with restricted access. You can be in two places at once and reduce the risk of arc flash by separating yourself from hazardous measurement situations. Just connect the meter to the test point and then place the display in a location up to 10 meters (33 ft.) away where you can see it. No more having to stretch into tight spots or hard to reach locations to take measurements. No more having to hold both the meter and the test leads to make a measurement. The Fluke 233 is ideal for any application where the measurement point is separated from controls or where you can’t stay close to the meter during measurements due to hazards, moving machinery or in clean rooms. Plus, it features True RMS AC voltage and current for accurate measurements on non-linear signals.
Key features:
True RMS Digital Multimeter with detachable display
Measures up to 1000 VAC and DC
Measures up to 10 A (20 A for 30 seconds)
Provides a 10,000 μF capacitance range
Measures frequency to 50 kHz
Includes a built-in thermometer to measure temperature without a separate instrument
Other useful features:
Radio transmitter automatically turns off the when the display is connected to the meter so you can use it as a conventional multimeter
Easy to read display with large digits and bright backlight
Delivers approximately 400 hours of battery life
Offers resistance, continuity, and diode test
Features a removable magnetic display that can be conveniently mounted where it can be easily seen
Low power wireless technology allows the display to be moved up to 10 meters (33 ft.) away from the point of measurement, without causing measurement interference
Allows you to take measurements without holding the meter, to improve visual focus on probes and augment safe electrical measurements
Provides auto power-off to maximize battery life
Features Min/Max, and Average recording to capture variations automatically
We know industrial electricians work in tough environments, that’s why we have kitted our Fluke 179 True RMS digital multimeter with industrial strength test lead probe kit in a compact lightweight soft case. This kit includes AC280 SureGrip™, Alligator Clips TP220 SureGrip™, Test Probes, TL224 SureGrip™, Silicone Test Leads and ToolPak, magnetic meter-hanger backed by a limited lifetime warranty on the multimeter, and 1-year on all accessories.
Why choose lesser quality we you can get it all with Fluke!
A full-featured, precision multimeter for troubleshooting electrical and electronic systems
Delivers accurate true-RMS AC current and voltage plus frequency, capacitance, resistance, continuity and diode measurements
Increases productivity with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-average recording
Includes a built-in thermometer to measure temperature without having to carry a separate instrument
Other useful features:
Safety rated CAT III 1000 V, CAT IV 600 V
Comes with a lifetime warranty
Allows closed-case calibration through front panel
Includes ergonomic case with integrated protective holster
What's Included?
Fluke 179 Multimeter
80BK-A Integrated DMM Temperature Probe
Installed 9V battery
Users’ manual
AC280 SureGrip™ Hook Clips
TL910 Electronic Test Probes
TL224 SureGrip™ Insulated Test Leads
TPAK ToolPak™ Magnetic Meter Hanger
Soft carry case
Specifications
Specifications
Voltage DC
Accuracy1
±(0.09% + 2)
Max. resolution
0.1 mV
Maximum
1000 V
Voltage AC
Accuracy1
±(1.0% + 3)
Max. resolution
0.1 mV
Maximum
1000 V
Current DC
Accuracy1
±(1.0% + 3)
Max. resolution
0.01 mA
Maximum
10 A
Current AC
Accuracy1
±(1.5% + 3)
Max. resolution
0.01 mA
Maximum
10 A
Resistance
Accuracy1
±(0.9% + 1)
Max. resolution
0.1 Ω
Maximum
50 MΩ
Capacitance
Accuracy1
±(1.2% + 2)
Max. resolution
1 nF
Maximum
10,000 µF
Frequency
Accuracy1
±(0.1% + 1)
Max. resolution
0.01 Hz
Maximum
100 kHz
Temperature
Accuracy1
±(1.0% + 10)
Max. resolution
0.1°C
Range
-40°C / 400°C
1. Accuracies are best accuracies for each function
Environmental Specifications
Operating temperature
-10°C to +50°C
Storage temperature
-30°C to +60°C
Humidity (without condensation)
0% – 90% (0°C – 35°C)
0% – 70% (35°C -50°C)
Safety Specifications
Overvoltage category
EN 61010-1 to 1000 V CAT III
EN 61010-1 to 600 V CAT IV
Fluke 177 True-RMS Digital Multimeter delivers the right features for electrical maintenance experts.
With its precision, reliability, and ease of use, the Fluke 177 Digital Multimeter is the preferred solution for professional technicians worldwide. Independently tested for safe use in CAT IV 600 V/CAT III 1000 V environments, the Fluke 177 Includes all the features you need to troubleshoot and repair many problems in electrical and electronic systems.
With the Fluke 177 Digital Multimeter you get True-RMS voltage and current measurements, 6000-count resolution, manual and automatic ranging, and frequency, capacitance, resistance, continuity, and diode measurements. In addition, the Fluke 177 provides 0.09?sic accuracy, a digital display with analog bar graph and backlight. Plus a limited lifetime warranty.
True-RMS digital multimeter with the features professional technicians prefer
Increases productivity with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-average recording
Measures AC and DC voltage to 1000 V
Delivers accurate True-RMS AC current and voltage plus frequency, capacitance, resistance, continuity and diode measurements
Safety rated CAT III 1000 V, CAT IV 600 V
Other useful features:
Features digital display with backlight for working in dim lighting
Allows closed case calibration through front panel
Features an ergonomic case with integrated protective holster
What's Included?
Installed 9V battery
Test leads
Users manual
Specifications
Specifications
Voltage DC
Accuracy1
±(0.09% + 2)
Max. resolution
0.1 mV
Maximum
1000 V
Voltage AC
Accuracy1
±(1.0% + 3)
Max. resolution
0.1 mV
Maximum
1000 V
Current DC
Accuracy1
±(1.0% + 3)
Max. resolution
0.01 mA
Maximum
10 A
Current AC
Accuracy1
±(1.5% + 3)
Max. resolution
0.01 mA
Maximum
10 A
Resistance
Accuracy1
±(0.9% + 1)
Max. resolution
0.1 Ω
Maximum
50 MΩ
Capacitance
Accuracy1
±(1.2% + 2)
Max. resolution
1 nF
Maximum
10,000 µF
Frequency
Accuracy1
±(0.1% + 1)
Max. resolution
0.01 Hz
Maximum
100 kHz
1. Accuracies are best accuracies for each function
Environmental Specifications
Operating temperature
-10°C to +50°C
Storage temperature
-30°C to +60°C
Humidity (without condensation)
0% – 90% (0°C – 35°C)
0% – 70% (35°C – 50°C)
Safety Specifications
Overvoltage category
EN 61010–1 to 1000 V CAT III
EN 61010–1 to 600 V CAT IV