Features

Detect document; record and compare leakage current readings over time as a means of preventing unplanned downtime; and identifying intermittent GFCI and RCD trips; all without taking equipment off line.

• True-rms measurements for accuracy when measuring complex; non-sinusoidal waveforms
• 61 mm jaw opening
• Highest resolution of 1 µA; measure up to 60 A
• Selectable filter function removes unwanted noise
• Max/Min/Average readings and hold function
• Forward-facing LED worklight for use in dark wiring cabinets
• Backlit display; auto backlight off and auto power off for extended battery life
• CAT III 600V safety rating

What's Included?

• Leakage Clamp Meter
• Soft case
• Safety manual
• Batteries: 2 AA

Specifications

• Electrical Specifications
  Measurement function	Alternating current
  AC ampere range	3 mA, 30 mA, 300 mA, 3 A, 30 A, 60 A
  Range selection	mA / A: manual selection
  	3 mA / 30 mA / 300 mA: automatic selection
  	3 A / 30 A / 60 A: automatic selection
  Range / Resolution	3 mA⊃1; / 0.001 mA
  	30 mA / 0.01 mA
  	300 mA / 0.1 mA
  	3 A / 0.001 A
  	30 A / 0.01 A
  	60 A / 0.1 A
  Accuracy – filter activated (40 to 70 Hz), filter off (40 to 1 kHz)⊃2;	3 mA – 30 A	1% + 5 digits
  	60 A	2% + 5 digits
  Frequency	40 Hz to 1 kHz
  Crest Factor	3
  After calibration accuracy is valid for one year. Accuracy is expressed as ± (% of reading + digits). Reference conditions 23 ±5 °C and a maximum relative humidity of 80%.
  ⊃1;The minimum value is 10 μA rms.
  ⊃2;Outside of the TC / °C 18 °C to 28 °C, 0.02 + 1
  Physical
  Display (LCD)	Digital readout: 3300 count
  Display refresh rate	4 times / sec
  Maximum conductor diameter	61 mm
  Dimensions	257 x 116 x 46 mm
  Weight	600 g
  Battery	2 AA, IEC LR6, NEDA 15A, alkaline
  Battery life	Expected battery life, without using backlight and spotlight, is more than 150 hours
  Automatic shut-down	Meter automatically shuts down after 15 minutes of inactivity
  Safety and Environmental Specifications
  General safety	IEC 61010-1: Pollution Degree 2
  Measurement safety	IEC 61010-2-032: CAT III 600 V / CAT IV 300 V
  Operating temperature	-10 °C to +50 °C
  Storage temperature	-40 °C to +60 °C
  Operating humidity	Non-condensing (<10>
  	90% relative humidity (10 °C to 30 °C)
  	75% relative humidity (30 °C to 40 °C)
  	45% relative humidity (40 °C to 50 °C)
  Protection class	IEC 60529: IP30 (jaw closed)
  Operating altitude	2000 m
  Storage altitude	12000 m
  Current sensor action category	IEC 61557-13: Class 1, ≤100 A / m
  Electromagnetic compatibility (EMC)
  International
  IEC 61326-1	Industrial Electromagnetic Environment
  CISPR 11	Group 1 Class B
  Group 1	Generated inside the equipment and / or use radio frequency energy associated with conducting the energy for the device’s own internal functions is essential.
  Class B	Equipment for home appliances and residential buildings directly connected to a low voltage power supply network equipment. When this device is connected to a test object, it may exceed the emission levels produced by CISPR 11 requirements.
  	Korea (KCC): Class A Equipment (Industrial Broadcasting & Communication Equipment)
  Class A	This product meets the requirements of industrial electromagnetic equipment, vendors or users should be aware of this. This device is intended for use in a commercial environment, instead of the home environment.
  	USA (FCC): 47 CFR 15 subpart B. This product is considered an exempt device per